Services

HomeServices

Services that we offers

  • STANDING SEAM METAL ROOFS
  • ASPHALT SHINGLES
  • CONCRETE DECKING SOLUTIONS
  • MODIFIED BITUMEN ROOFING
  • ARCHITECTURAL METALS
  • CLAY and CONCRETE TILE
  • BUILT UP SYSTEMS
  • EDPM SINGLE PLY MEMBRANE
  • TPO ROOFING SYSTEMS

All of our metal roofs are designed with mechanical fittings, Once the roof is installed and water tight there are no fittings to wear out in the Florida sun.  All of the flashings are designed to be mechanically water tight and to not wear out.  We offer seamless standing seam panels competitively priced, the bottom of the panel is locked to the perimeter metal to prevent wind uplift.  All panels have baked in color with a 35 yr Kynar finish.

We install Architect and 3-tab shingles from most major manufacturers. Owens Corning, GAF, Certainteed, and Firestone Building Products. All have competitive warranties. We offer a 10 year workmanship guarantee. All wood replacement is photographed digitally for the homeowner. All new valley metal and flashings. Hip and ridge cap. Premium underlayment UL rated. New vents adequately installed for proper ventilation. Boot guards installed. Ice and water shield.

There are special roofing situations where there is a concrete deck that will be used for a traffic deck.  There are new products and systems available to us today that will seal the concrete, and put layers of thin but high strength polyester sheets with elastomeric interplay and top coatings that are attractive and will allow for foot traffic.  It is important that we are in the process as early as possible to help with the design of equipment and water flow options.

A modified bitumen roof blends the reliability of a time-proven hot asphalt-applied built roofing systems with the modern benefits of of flexible plastic additives and polyester/fiberglass reinforcement roofing technology.  Polymer modified bitumen membranes are engineered waterproofing materials using asphalt-based bitumen and advanced polymers.  Modified bitumen membranes are attached to the substrate by hot asphalt, heat fusing or cold applied adhesives to form a strong, flexible, puncture resistant material.

Metal tiles are available that look almost the same as tile.  The cost is about the same as concrete tiles, and they can be installed in many places that are not built for the weight of concrete.  The next factor is that some metal systems have many colors available in “cool ” colors.  These are colors that have a pigment in the paint process that gives a reflective quality, and still retains the rating as being a “cool” color.  Metal roofs with cool colors prevent about 30% of the radiant heat, and if installed over cross battens, almost 45% of the radiant heat.

Concrete or clay tile can easily fit in the vision that a a homeowner, roofer or architect has for their roofing project.  We supply tiles in concrete or clay in a wide variety of colors, shapes, and surface finishes.  Our superior-quality tiles are available with dirt repellent, heat reflective, and algae-resistant coatings, and offer outstanding aesthetics.  They come in single or multiple colors, smooth or textured, with matt or gloss surfaces.  They are available in a wide range of sizes to meet customers’ requirements- the big tiles are ideal for industrial scale modern buildings, while our smaller tiles are perfect for renovation as well as restoration projects and stylish new build homes.

Built up roof membranes have been used in the U.S. for more than 100 years.  These roof systems are commonly referred to as “tar and gravel” roofs.  BUR systems are generally are composed of alternating layers of bitumen and reinforcing fabrics that create a finished membrane.  Over the years, the main roofing felts have changed from the original rag felts that were made from cotton rags to asbestos felts, back to rag felts that were really made with wood pulp fillers, to fiber glass felts to the current composition of fiberglass and polyester roofing felts.  The one constant in all of the systems is the use of hot asphalt as the waterproofing agent.

EDPM is a synthetic Rubber used in single-ply roofing.  It is the number one roofing choice for low slope and flat roofs. An EDPM membrane is essentially one large piece of rubber, cut to size for your job.  This rubber roofing membrane can survive all forms of weathering, and has been successfully tested to withstand wide ranges in temperature.

 

TPO (Thermoplastic Polyolefin) is among the fastest growing choices for commercial roofing.  TPO roofing is an ideal commercial roofing system because it is reliable, cost effective, easy to maintain, environmentally friendly, and easily conforms to numerous roofing situations. We provide TPO roofing for both new construction and roof replacement as well as for restoration of existing roofs.

Why Choose Us

24/7 availality

Dedicated team

Guranteed satisfaction

Free Estimate

Serving The Greater Central Florida Area For Over 24 Years.

We're there for you when you need us. Call or Email Us Today!

352-394-6461 OR Contact Us

Created by: AdamIvy